Low Energy Usage
Micro Footprint (52 cm2)
Densely Compacted Waste
Free of Hydraulic Oil or Contaminants
Suitable for Kitchens & Food Preparation Areas
The Mil-tek X-Press 100S Offshore Waste Compactor is a micro size waste compactor ideal for offshore locations such as platforms and rigs. As it is stainless steel, it can be seamlessly installed in kitchens or food preparation areas and the small footprint size of just 52cm2 ensures that it can be installed without major disruption.
The Offshore Waste Compactor is powered exclusively by compressed air, so can be installed indoors and in clean, working environments. It is free from hydraulic oil or other contaminants.
For offshore environments, waste compaction is vital. By installing the XP100S Compactor inside a working environment such as a food preparation area, you create a seamless process from waste create to waste disposal.
The elongated cylinder of the XP100S Compactor allows for more compaction with each cycle, creating densely compacted bags of waste up to 50 kg in weight. This further minimizes the amount of space required to store waste. The longer cylinder also uses less power with each stroke, and can run on as little as 2 bars of pressure.
Ibis is an international hotel company with over 1,000 hotels worldwide. Ibis partnered with Mil-tek because of the increasing volume of waste and the space it was taking up.
Espresso Exchange Cafe in Liverpool bought an XP100 waste compactor to handle their general/mixed waste. The ease of use and small size were particularly advantageous.
Super Brugsen is a supermarket chain with more than 220 stores in Denmark. They use two mobile wagons in their food production are for both their biodegradable and recyclable waste.
The key to installation is placing the machine in an optimal location. A Mil-tek consultant can advise you on this. The machine can be fastened to walls or floors.
Fill the wagon with waste. Closing the lid activates the pressing cycle. To open, simply lift the lid and wait for the plate to return. Repeat this process until the wagon is full.
To empty, simply release the handle, wait for the pressing plate to return and roll out the wagon. Bags can be sealed using X-Press Ties and a Mil-tek Bag Strapper.
Pneumatic compactors use far less energy to run. Mil-tek's patented ECO-Drive system applies constant downward pressure using the available power, thereby further compacting waste without using additional energy.
Pneumatic machines are also quieter in operation and contain no inherent risk of oil contamination or electrical fire.
Yes you can. The Offshore Waste Compactor is designed for exactly this. It has a stainless steel frame meaning it is ideal for kitchens, it is low on both noise and energy usage, and it's small size further enhances its flexibility.
In a word: compaction. Waste takes up room. It's a bulky nuisance and in offshore environments, space is key. With a Mil-tek 100S Offshore Waste Compactor, you can compact non-recyclable waste by a factor of 10:1. freeing up precious space.
Like most good machines, we recommend an annual service by a certified Mil-tek technician to ensure a healthy and long-lasting machine. In Offshore environments, this might not be practically possible, so be sure to speak to a consultant about service options and spare parts kits when you buy.
The XP100S Waste Compactor is an ideal solution for any size of professional kitchens. The small footprint allows it to be easily installed in compact locations, and as it is both stainless steel and air-powered, there is no risk of oil contamination or rust.
Full bags of rubbish can be placed directly into the Offshore Waste Compactor, keeping odours and fluids inside the drum to maintain a high standard of cleanliness and hygiene.
Offshore platforms rely on safe, hazard-free working environments and strategic use of space in order to safely operate.
A Mil-tek XP100S Offshore Waste Compactor is perfectly suited for such an environment as it bears no inherent hazard risk and has a floor-space footprint of less than 52cm2.
Waste Compactors are ideal on commercial ships help to minimize the volume of waste as well as freeing up storage space. Mil-tek has a range of compacting machines suitable for such a task, include free and fixed wagon models.
Depending on the size and scale of the operation, a Mil-tek waste management consultant can help to find the right solution.
|Bag height (mm)||600 mm|
|Bag diameter (mm)||450 mm|
|Weight of full bag||<50 kg|
|Material||General / Kitchen Waste|
|Degree of Compression||< 90%|
|Noise level||< 70 dB(A)|
|Pressure||1500 kg at 5 bar|
|Approvals||CE, AS/NZ 4024.1|
Just complete the form below and our Shipping & Offshore Team will contact you directly.