Optimal working height
Cans, drums & tins up to 30L
Paint oil and hazardous fluids
Can be supplied with or without legs
The Mil-tek 2101S Stainless Steel Can Crusher crushes cans and tins and reduces the volume of space required to store waste by up to 90%.
In offshore environments, strict waste management is critical. the 2101S Can Crusher allows for simple and straightforward disposal of the various cans, drums and tins that are used every day on board. As it is stainless steel, there it is easy to maintain and easy to clean. Paint, oil and other materials are no trouble for a machine than can compact and crush metal, steel, tin, aluminium - almost any form of non-aerosol can up to 30L in size.
The 2101S Can Crusher can be supplied with or without the legs, meaning that it can easily be installed into the working environment, and allow users to operate and an optimum working height.
With a footprint of just under 27cm2, the Can Crusher is ideal for confined workplaces and locations where space is limited.
The Mil-tek 2101S Stainless Steel Can Crusher is powered exclusively by compressed air, meaning it is free of both electrical and hydraulic components. This maximises the safety of the machine, and minimizes the amount of power required to run it.
The University of Mary Washington is a liberal arts and sciences university in Virginia. They partner with Sodexo to manage their waste. Sodexo opted for a Can Crusher to facilitate easy compaction and transportation food cans.
Hörby Paint Shop is an auto paint shop and bodywork shop in Sweden. The 101 Can Crusher reduces the cost of refuse and eliminates the need to rent a container.
Rosenlunds Vårdcentral is a hospital in central Stockholm. They use a can press in order to hygienically reduce the volume of waste produced.
Installation is as simple as providing the 2101S Can Crusher with compressed air. Depending on requirements, the machine comes with or without legs.
Place an empty tin or canister upright into the machine. The machine can crush containers up to 30 litres in size.
To activate the can crusher, close the door and depress the handle firmly. This activates the pressing cycle, which takes between 7-10 seconds.
Anything up to 30 litres in volume: Cans, drums and tins, though not pressurised/aerosol cans.
As the 2101S Can Crusher is stainless steel, it is not necessary to clean out cans before they are compacted. However, in order to maximise the life span of the machine, it is advised that you rinse cans in cold water before compacting them. This will in turn reduce the need to clean the machine.
The 2101S is powered exclusively by compressed air, making it ideal for the shipping and offshore industry. This also means that it is free of hydraulic oil, electrical components, or any other inbuilt fire hazard. Patented ECODrive technology ensures that the can crusher only uses the required amount of energy with each cycle.
Up to 90% for most cans, tins and drums. This makes storing waste significantly easier, and also facilitates aluminium recycling for correctly managed waste that is brought ashore.
With a crew to feed, a ship to maintain and space limited, commercial ships use a range of tins, cans and drums of varying sizes. Whether it be in the kitchen or elsewhere, a Mil-tek 2101 Stainless Steel Can Press can assist in all elements of day to day work on board a commercial ship by compacting the various canisters used.
With a footprint of less than 27cm2, it can easily be installed in compact, confined locations.
Offshore Platforms use a variety of oil, paint and food canisters which need to be properly disposed of. The Mil-tek 2101S Can Press is ideal for such working environments as it is stainless steel ensuring it is durable, and not as susceptible to the elements as traditional hydraulic machines.
The 2101S Can Press is also powered exclusively by compressed air. Pneumatic machines are free of hydraulic oil and electrical components, making them ideal for "safety first" offshore platforms.
Between guests and crew, the volume of waste generated on board cruise ships is significant. A 2101S Can Press is flexible in that in can be used in any of the various kitchens on board or can be used below deck by the crew in the operation of the vessel.
With a small floor-space footprint, low power requirements and compact size, the 2101S is an ideal assistant for compacting, crushing and pressing tins, cans and drums up to 30L.
|Capacity||Cans: <30 L.|
|Degree of Compression||85-90%|
|Noise level||<70 dB (A)|
|Pressure||2250 kg at 8 bar|
Just complete the form below and our Shipping & Offshore Team will contact you directly.